A one-part high-tack adhesive/sealant formulated for instant grab and strong bonding across a wide range of construction substrates. The supplied packaging states bond strength up to 350 kg/m².
| Feature | Instant-grab performance |
|---|---|
| Feature | Multi-surface adhesion |
| Feature | Interior and exterior application |
| Feature | Suitable for porous materials, including natural stone |
Substrates and environments this product is recommended for.
| Compatible with | WPC, SPC and PVC |
|---|---|
| Compatible with | Metal, concrete and masonry |
| Compatible with | Stone, marble, ceramic, tile and glass |
| Compatible with | Polycarbonate and other common building materials |
Data taken from the product packaging.
| Product type | One-part MS sealant |
|---|---|
| Colour | White |
| Pack size | 300 ml cartridge |
| Claimed bond | Up to 350 kg/m² |
| Not for | PE, PP or PTFE |
| Storage | Cool, dry; below 25 °C |
Clean and dry the substrate. Cut the nozzle at 45 degrees, fit it to the cartridge, load into a sealant applicator and apply an even bead before bonding.
| Required tool | Applicator gun for 300 ml cartridges |
|---|---|
| Preparation | Clean, dry, degreased surface |
| Nozzle | Cut at 45 degrees to the joint width |
Safe handling
Uncured MS sealant may irritate eyes and skin. Flush eyes with water for 15 minutes and seek medical advice. Use with ventilation and keep out of reach of children.
Information based on the supplied packaging artwork. Confirm the current technical data sheet and safety data sheet before any technical or regulatory use.