A liquid nail adhesive designed to replace traditional nails for fixing and bonding a broad range of materials. It combines strong initial adhesion with durable, flexible and weather-resistant performance.
| Feature | Strong initial adhesion |
|---|---|
| Feature | High bonding strength |
| Feature | Flexible, waterproof and weather-resistant |
| Feature | Low odour; packaging states no formaldehyde or benzene |
Substrates and environments this product is recommended for.
| Compatible with | Wood, MDF and gypsum board |
|---|---|
| Compatible with | Stone, tile and mineral surfaces |
| Compatible with | Metal and plastic |
| Compatible with | Rubber and mixed-material assemblies |
Data taken from the product packaging.
| Product type | Construction adhesive |
|---|---|
| Colour | As supplied |
| Pack size | 300 ml cartridge |
| Use area | Interior |
| Key benefit | No-drill fixing |
| Temperature resistance | -20 °C to +90 °C |
| Storage | Cool, dry; below 27 °C |
Clean the material surface and remove oil, grease and dust. Cut the nozzle, load the cartridge into an applicator gun and apply in dots or beads depending on the load.
| Required tool | Applicator gun for 300 ml cartridges |
|---|---|
| Preparation | Clean, dry, degreased surface |
| Nozzle | Cut at 45 degrees to the joint width |
Safe handling
Uncured adhesive may irritate eyes and skin. Flush eyes with water for 15 minutes and seek medical advice. Use with ventilation and keep out of reach of children.
Information based on the supplied packaging artwork. Confirm the current technical data sheet and safety data sheet before any technical or regulatory use.